This is a desktop 2-bay M.2 NVMe hybrid dock. Inside a 133.8 × 113 × 39 mm chassis it combines two M.2 NVMe slots (2230–2280), SD and microSD card slots and a USB 3.2 10 Gbps USB-A expansion port, with a Type-C upstream link rated at up to 20 Gbps.
ModelDU32M51
Input InterfaceUSB3.2(20Gbps)
Output Interface2×M.2 NVMe、USB3.2 10Gbps Hub、SD/TF
Motherboard SlotUSB3.2(20Gbps)
Transmission RateUSB3.2 Speed
Auxiliary Accessories
Product Size133.8×113×39 mm
A desktop 2-bay M.2 NVMe hybrid dock. Inside a 133.8 × 113 × 39 mm chassis it combines two M.2 NVMe slots, SD and microSD card slots and a USB-A 10 Gbps expansion port, with a Type-C upstream link rated at up to 20 Gbps.
A desktop 2-bay M.2 NVMe hybrid dock.
Core combination: 2 × M.2 NVMe slots + SD/microSD card reader + USB-A 10 Gbps hub.
Upstream Type-C rated USB 3.2 at 20 Gbps; the downstream hub is rated at 10 Gbps.
Core applications: M.2 hot-data scratch space, media ingest, data backup, storage expansion, and video editing plus transfer.
Enclosure: 6063 extruded aluminium, anodized; 1.2 mm SECC inner frame; magnetic top cover; 80 mm dual-ball-bearing fan.
Dimensions: 133.8 × 113 × 39 mm — essentially the same chassis platform as the HM-211U4.
| Item | Detail |
|---|---|
| Drive Bays | 2 × M.2 NVMe, 2230–2280 |
| Controller | Multi-chip combination of Asmedia, JMicron and Genesys Logic; |
| Upstream Interface | USB 3.2 Type-C, rated 20 Gbps, |
| Downstream Expansion | USB-A, USB 3.2 10 Gbps hub |
| Card Reader | SD and microSD slots; documentation states "use one at a time" |
| Power | Standard 24 W adapter, 12 V DC, 5.5 × 2.5 mm barrel |
| Power Protection | Cuts power automatically if a supply of excessive voltage is connected |
| Material | 6063 extruded aluminium, anodized body; SECC inner frame; magnetic cover |
| Cooling | 80 mm dual-ball-bearing quiet fan, base-mounted |
| Environment | 0–30 °C, 20%–80% RH |
| Supported OS | Windows / macOS / Linux |
| Included Items | Dock, 2 × USB cables, user manual, power adapter, M.2 standoffs and screw kit |
Two M.2 NVMe slots — suited to high-speed scratch, media and backup drives; more flexible than a single-slot NVMe enclosure.
Card reader and hub in one — quick ingest from camera SD cards, while the USB-A port takes flash drives, card readers, keyboards and mice and other low-power devices.
Active cooling — the 80 mm dual-ball-bearing fan helps during sustained read/write on two NVMe drives.
Magnetic top cover — easy access for installation and maintenance.
Power protection — a supply of excessive voltage is cut off automatically, one more safeguard than a standard enclosure offers.
Hot-swap — documentation states hot-swap is supported; drives attached over NVMe should still be ejected from the operating system before the cable is removed.
The two M.2 drives share the 20 Gbps upstream link
20 Gbps is the total bandwidth of the Type-C upstream link, not 20 Gbps per M.2 slot.
Two NVMe drives under simultaneous load compete for that bandwidth; actual sustained throughput depends on the controller, the PCIe allocation and the host port.
No RAID, no clone, no erase
Unlike the HM-211U4, this model has no RAID, offline clone or offline erase.
The two M.2 slots are independent and cannot be combined into a RAID array.
The USB-A port has limited power
Rated for external drives up to 5 V / 1 A — 5 W.
Not suitable for 2.5-inch mechanical portable drives with high spin-up current; better suited to flash drives, card readers and low-power SSDs.
Whether 24 W is sufficient should be confirmed
Two NVMe drives at peak plus the hub, the card reader and the fan: 24 W is generally enough for everyday use, but the margin at sustained full load is not large.
Confirm the adapter's exact output rating and its stability with both drives at full load.
20 Gbps has prerequisites
The host must support USB 3.2 Gen 2×2 at 20 Gbps; a standard 10 Gbps or 5 Gbps port will run slower.
Documentation states "supports all USB ports on mainstream PCs", but "all ports" does not mean all of them can run at 20 Gbps.
Related Downloads
Downloads