Features
• Compliant with Universal Serial Bus 3.1 Specification Revision 1.0
• Compliant with Universal Serial Bus Specification Revision 2.0
• Compliant with USB Attached SCSI Protocol Revision 1.0
• Support Muliple INs function
• Support USB3.1 and USB2.0 Link Power Management
• Support two ports of USB3.1
• Up to USB3.1 Gen-II 10Gbps
• Support Control, Bulk, Stream, Interrupt, Isochronous transfer type
• Support independent port power control
• Support overcurrent detection
• Support Remote/Wakeup event
• Integrate Spread Spectrum Controller for USB3.1 interface
• Backward compatible with Legacy USB function and device
• Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps
• Power Input: 4-pin Power Connector
System Requirements
• Windows 7 (X86/X64)
• Windows 8.x / 10 (X86/X64) (Windows in-box driver)
• Support Linux 2.6.31 or later (Linux OS already implemented USB3.0 driver)
Package Contents
• 1 × M.2 to USB3.2 Gen2 Type-C Host Controller Card
• 1 × User Manual
• 1 × 4-pin Power cable

• 1 × Screws(M.2)

• 2 × Profile Bracket

Note: Contents may vary depending on country/market